dell inspiron - Dell Inspiron E1705 Motherboard Replacing Manual Guide

Posted in Dell on 21st February 2013

Dell Inspiron E1705 Motherboard Replacing Manual Guide

Step 1 – battery
Before you begin, make sure the computer is shutdown and any disconnected external power source. Once the computer is off, twist and locate the battery motor.
Step 2
Lift the battery and now the engine in the open position.
Step 3: hard disk
Locate the two screws on the left side of the computer, just above
The battery compartment. With a screwdriver philips removed two screws. If you use tools from iFixit kit, use the marking the ‘ PH1.
Step 4
Slide the hard drive out of the hard drive compartment. The disc itself is in a tray them has two screws in the lateral tray holding the hard drive to the status bar. Remove them and the hard disk of the status bar.
Step 5 – optical drive
Screw is removed, locate shows the label has a lock symbol
Step 6
Use the screwdriver to enpujar gently optical drive
Step 7-tiny
If you use tools from iFixit kit, use the marking the ‘ PH1.
Locate the 12 screws around the edges of the machine removed
They
Step 8
Turn over the computer and the screen open seat. USE the spudger to carefully pry the Panel, as it is in the pictures shows, carefully remove the plastic Panel
Step 9
Use the screwdriver to remove the screws in red. Carefully lift the keyboard and place it just below the screen, as the image shows. Always connect the keypad has the base plate.
Step 10
Remove the keyboard completely before, use the tool to gently lift spudger flange keyboard a base plate.
After the keyboard has been disconnected, remove the keyboard completely.
Step 11
Using a screwdriver, remove the screws as it is in the image shown. They all have the letter “P” next to them. Carefully part rear connections shown. Once the screws have been removed and you debroches them, use the gently separate spudger tool box Panel background.
Step 12
Remove the plastic folding gently toward the screen. You can bend backwards screen if that helps. For motherboard, optical drive is already eliminated. Sin embargo for the small, is not necessary mess.
Step 13-Noctua heat
Unscrew the 4 screws shown the image on. Screws nº out until the end.
Step 14
It gently removes the heat sync
Step 15
Heat sync line is connected to the video card. To remove heat synchronization also requires removing the video card. Remove the 4 screws as shows is the screws of the first of the the biological image to SÄLEN completely.
Carefully lift the video card and plate heat base timing.
Step 16 – rear fans removed from the motherboard of the computer. This will make more easy remove the base plate. Remove the screws the photo to remove the fans.
Step 17
Back to the illustrious, gently pulling up children. Remove the screws indicated in the base plate
Step 18
Carefully remove the base plate of the portable lift and Melrose sides simultaneously. Once the motherboard is free, return to the screen of the laptop and gently
Removed the wireless adapter wire black and white. Once disconnected, strip wires through everything and remove completely the motherboard computer.
Step 19
The team should look like the computer in the box of sin
Base plate. Reassemble the appliance, follow these instructions in reverse order to Download this Dell Inspiron E1705 Motherboard Replacing Manual Guide HERE