Using Your eMachines Flat-Panel Monitor
Setting up the monitor To setup the monitor, first attach the base, then connect cables. Attaching the base : e s a b e h t h c a t t a o T • Place the base on a tabletop, then press the base’sreleasebutton while you slide the monitor neck down onto the base. Connecting cables To connect video and power cables: 1 Position your computer and the monitor so you can reach the back of each, then connect the blue VGA video cable to the blue VGA video connector under the back of themonitor. Make sure that your computer is turned off, then connect the other end of the video cable to the matching video port on the back of your computer. Connect the power cord to the power connector under the back of the monitor. 4 Option for Dual Model Position your computer and the monitor so you can reach the back of each, then connect the white DVI video cable to the white DVI video connector under the back of the monitor.
Using Your eMachines Flat-Panel Monitor 4 If you want to have your computer’s audio played through your monitor’s speakers, connect the included audio cable to your computer’s headphones or line out jack (usually color-coded green) and to your monitor’s AUDIO jack. Plug the power cord into a correctly grounded (three-prong) ACpower outlet. We recommend using a surge protector to protect your monitor from voltage spikes. Connecting a security cable You can secure your monitor to your computer desk (or to another heavy object) with a cable lock (such as a Kensington™ lock). To connect a cable lock, follow the cable lock’s instructions to connect it to the lock slot on the back of your monitor (cable lock not included). Turning on the monitor To turn on the monitor: 1 Press the power button on the front of your monitor. The power LED on the power button turns blue. (The appearance of your monitor may vary from that shown.) Important Turn on your monitor before turning on your computer. Audio jack Cable lock slot Power button
Download eMachines Flat-Panel Monitor User Manual Guide