User Manual Free Download

Acer - Gadget Owner's manual

How to Installing Mac OS X v10.5 Leopard Manual Guide

Posted in Acer, Software on 27th April 2013

How to Installing Mac OS X v10.5 Leopard Manual Guide

TOOLS:
Mac OS X v10.5 Install Disk (1)
PARTS:
FireWire 400 SATA Hard Drive
Enclosure (1)
Firewire ATA Hard Drive Enclosure (1)

OVERVIEW
At the time of writing this guide, OS X 10.5 Leopard is the current version of Apple. The
Apple’s latest operating system is OS X 10.7 Lion. The installation process should be relatively the
you even than previous versions, however, must first create a lion recovery disk
using this tool provided by Apple. Install Mac OS X v10.5 Leopard on a new hard drive.
Step 1 – v10.5 Leopard
Depending on the situation, there are two ways to install Mac OS X v10.5 Leopard on hard disk: method 1: install the operating system and the software from scratch. If this is your goal,
continue to the step of the second. Method 2: Clone existing hard drive. If this is your goal, go to step 19.
Step 2
Method 1: new installation insert a Mac OS X v10.5 Leopard installation disc into the optical drive. Hold down the “option” key and restart the computer to bring up the menu of boot options. To begin the installation, click install the disk icon in the start menu.
Step 3
When prompted, select your language and click the arrow to continue.
Step 4
Once the load installer, will be greeted by a welcome window.
Select “Disk utility” from the Utilities menu in the drop-down menu.
Step 5
Select your new drive in the left column in disk utility. The correct partition type must be set to your hard drive. If it’s a new hard drive, cannot partition listed. For a machine of Intel processor, you must have “GUID partition table” listed.
For power PC machine, you must have “Apple partition map” listed. If you see the wrong partition type, continue with the next step to delete and re-create the partition. If this is not the case, go to step 8.
Warning: Remove the partition will erase the entire contents of the partition.
Step 6
The next two steps are only necessary if the disk partition is out of service. Permanently delete a partition will erase all the information stored inside. Select the partition on the disk and then click on the “-” button. When prompted, click the “Delete” button to delete the existing partitions in the reader. Then removed partitions, click on ‘ options ‘… ».
Step 7
Select the partition scheme that is required for your computer: choose “GUID partition table” Intel machines. Select ‘ Apple Partition map ‘ for PowerPC machines. Click ‘Ok’. Press ‘ +’ to add a new partition. Press the “apply” button.
Step 8
Click on the tab “Delete” choose the volume format (we recommend “Mac OS extended (journaled)”).
Step 9
Type a name for the unit. Apple names its readers “Macintosh HD”
factory. Click on ‘delete’.
Step 10
A warning window will appear and ask if you want to continue with the removal process. Click on ‘Delete’ in the warning window that has appeared.
Step 11
After erasing is done, quit disk utility.
Step 12
After leaving the disk utility, proceed with the installation by clicking on the continuous”" button. ” A window will open and ask if you accept the software license agreement. I accept the software license agreement by clicking on the button “I accept”.
Step 13
Be sure to select the correct drive as the installation
destination. Click ‘Continue’ to continue the installation.
Step 14
We are now ready to install Mac OS X v10.5 Leopard on your hard disk. Before proceeding to the next step, make sure that all configuration parameters are correct. Click on “Install” to start the
installation.
Step 15
Setup will verify the DVD source disk before starting the installation process. In this step, you will see a “Skip” button in the settings window. Do not click the “Skip” button if you have not used the installation disk before (or recently).
Step 16
Leopard will now be installed on your hard disk. The installation process can vary from half an hour to an hour.
Step 17
If you install Leopard from a retail disk, please skip this step. If you install an OEM version of Leopard, you must install the iLife applications and other software from the disk to install the applications.
Step 18
The installation was successful. Click “restart” to restart the
computer. At this point, you are finished with the installation of Mac OS X.
Step 19
Method 2: the existing hard drive cloning. The following instructions assume that you use a USB/FireWire external to a hard drive from the laptop and enclosure SuperDuper! cloning software. If you are using a different configuration, your installation process may be a little different. Install the new hard drive in external enclosure USB/FireWire. Connect the USB/FireWire box to your Mac.
Step 20
In the ‘Go’ menu, select ‘utilities’. Open “disk utility” in the “Utilities” window
Step 21
Select your new drive in the left column in disk utility. The correct partition type must conform to your new hard drive. If it’s a new hard drive, cannot partition listed. For a machine of Intel processor, you must have “GUID partition table” listed.
For power PC machine, you must have “Apple partition map” listed. If you see the wrong partition type, continue with the next step to delete and re-create the partition. If it is not, go to step 24.
Warning: Remove the partition will erase the entire contents of the
partition. Make sure that you have selected the new hard drive!
Step 22
The next two steps are only necessary if the disk partition is out of service. Permanently delete a partition will erase all the information stored inside. Select the partition on the disk and then click on the “-” button. When prompted, click the “Delete” button to delete the existing partitions in the reader. Then removed partitions, click on ‘ options ‘… ».
Step 23
Select the partition scheme that is required for your computer: choose “GUID partition table” Intel machines. Select ‘ Apple Partition map ‘ for PowerPC machines. Click ‘Ok’. Press ‘ +’ to add a new partition. Press the “apply” button.
Step 24
Click on ‘delete’.
Choose the volume format (we recommend “Mac OS extended (journaled)”)
Type a name for the unit.
Step 25
It may be an option to “install Mac OS 9 drivers” under the sign of the removal. We do not recommend installing these drivers, unless the disk should be used in any other environment of Mac OS x. disable the checkbox “To install Mac OS 9 disk drivers”. Click on ‘delete’.
Step 26
A warning window will appear and ask if you want to continue with the removal process. Click on ‘Delete’ in the warning window that has appeared. When you are prompted if you want to use the new disk data backup with time machine, get clicking ‘Cancel’. After the unit was deleted, quit disk utility. The new hard drive should now appear in desktop PC.
Step 27
Download and install SuperDuper! Open SuperDuper!.
Step 28
Select the current hard disk drop-down menu labeled ‘copy’.
Select your new hard drive in the dropdown list titled “«until the».”
Select “Backup – all files” in the drop-down menu below entitled “use”.
Step 29
Click “Copy.” now if prompted to provide your password. Click ‘Ok’.
Step 30
Wait for the disc to be copied (this may take several hours if you have much on the hard disk). When you apply to register SuperDuper!, choose ‘Save’ buy the software or “Later” to save later.
Step 31
Once the copying is complete, click ‘OK’ and exit SuperDuper!. At this point, should take care of his new album hard with existing software can be installed; However, we recommend that you test the software installation.
Step 32
Hold down the “option” key and restart the computer to bring up the menu of boot options.
Step 33
Select new hard disk menu startup options. Wait to start the computer and verify that it is really tearing up the new unit. If indeed the new drive is started, its icon appears under the internal disk on the desktop icon.
Your new hard drive is now ready to be installed on your computer.
Remove the external casing of your new hard drive and install on your computer. Installation instructions are available for a variety of Mac. To reassemble the appliance, follow these instructions in reverse order. Download HERE with Figures

iPad 3G Dock Connector Cable Manual Installaing for User’s Guide

Posted in Acer on 26th March 2013

iPad 3G Dock Connector Cable Manual Installaing for User’s Guide

TOOLS:
Metal Spudger (1)
Tools for the opening of plastic (1)
Torx T5 screwdriver (1)
OVERVIEW
You can use this guide to replace the connecting cable of your iPad.
Step 1 – Display block
The iPad which is shown in the photo may differ slightly from your iPad, but the procedure is the same. Insert a metal spudger between the right edge of the screen and the whole of the rear panel.
Turn the spudger away to release the tabs on the top edge of the screen.
Step 2
Insert a spudger second metal between the top edge of the whole screen and the rear of the Panel Assembly to keep the rear pads in place. Lift the fourth Assembly of the screen.
Step 3
Continue prying off the screen toward the outside of the Panel back along the bottom and left edges of the iPad. Use extreme caution when approaching the top of the iPad. Water from digitizer is located near the edge of the back panel and can easily be damaged.
Step 4
Lift the display Assembly from the rear by its lower edge. Do not lift all widescreen the
rest of the iPad as a fragile antenna with very little slack
Always connect the two components.
Step 5
Use the flat end of a spudger to lift the nearest antenna connector
the bottom of the iPad up out of their communication card holder.
Step 6
In the following steps, will disconnect three wires from the screen to the logic board. The wires are for
the following components: ambient light sensor display scanner data Cable
Step 7
The edge of an iPod opening tool to raise the selected tabs with ribbons cables digitizer in their sockets from the logic board. Make sure that the valve, not the outlet itself is opening up. Pull the scanner cables tape out of their orbits.
Step 8
Use an iPod opening tool to remove the connector from the ambient light sensor
its taken by lifting it carefully upwards.
Step 9
Disconnect the cable from the data of the main map screen to switch to the top of the metal retainer part by its tab to remove the black plastic pull your plug wire connector. Pull the parallel connector on the side of the logic board.
Step 10
Remove the rear Panel-Mount display.
Step 11 – dock Dock remove the two Torx T5 4.56 m connector cable
screws that hold the dock for main board connector cable.
Step 12
Remove the only 2.84 screws Torx T5 connecting cable connector dock in the rear cover Assembly.
Step 13
Remove the two screws Torx T5 2.84 m coupling for mounting on the back dock connector.
Step 14
Carefully remove the plastic cover on the WiFi/Bluetooth Board and
Dock connector cable using an iPod opening tool.
Step 15
Wi – Fi and Bluetooth antennas remove their respective orbits in the Wi-Fi/Bluetooth adapter.
Step 16
Remove the cable from the base of the Assembly of the connector on the rear panel.
Reassemble the appliance, follow these instructions in reverse order. iPad 3G Dock Connector Cable Manual Installaing for User’s Guide HERE For Download