User Manual Free Download

Hard Drive Replacement Models A1151 A1212 A1229 and A1261 MacBook Pro 17″

Hard Drive Replacement Models A1151 A1212 A1229 and A1261 MacBook Pro 17″ 

Instruments used in this guide
Phillips 00 Screwdriver
Spudger
T6 Torx Screwdriver
Components relevant to this info
500 GB 5400 RPM Western Digital SATA Exhausting Drive (New)
500 GB 7200 RPM Seagate SATA Arduous Drive (New)
750 GB 7200 RPM Seagate SATA Onerous Drive (New)
MacBook Professional 17″ (Model A1151) Arduous Drive Bracket
MacBook Professional 17″ (Models A1212/A1229/A1261) Exhausting Drive Bracket
Universal Drive Adapter
Step- 1 Battery
Use your fingers to push each battery launch tabs
away from the battery and raise the battery out of the
computer.
Step- 2 RAM Defend
Take away the four an similar Phillips screws from the
reminiscence door.
Step- three
Raise the reminiscence door up enough to get a grip on it,
and slide it in the direction of you, pulling it away from the
casing.
Step- 10
Disconnect the trackpad and keyboard ribbon cable
from the logic board.
Take away the upper case
Step- eleven Laborious Drive
Peel up the orange ribbon cable taped to the highest of
the laborious drive. This cable is still linked to the
laborious drive, so you’ll solely be able to raise up on the
cable a little.
Step- 17
Take away the two silver T6 Torx screws from the left
side of the laborious drive (the rubber bumpers stay in
the case for the left aspect of the drive)
You may have to switch these screws to your
new arduous drive do you have to’re altering drives.
Should you’re putting in a new exhausting drive, we
have an OS X set up information to get you up
and running.

View| Download for Hard Drive Replacement Models A1151 A1212 A1229 and A1261 MacBook Pro 17″